Customization: | Available |
---|---|
After-sales Service: | / |
Warranty: | / |
Still deciding? Get samples of $ !
Order Sample
|
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
---|---|
Support payments in USD |
Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Step 1 Measure the length and width of the window glass and take the largest size, find a clean place to cut the right size, pay attention to be 1-2 centimeters larger than the size of the glass. Step 2 Add detergent or shower gel in the water, the ratio of 1 kg of water plus 5-7 drops (the whole process is to use such water) with a spray bottle evenly sloped to the glass. Step 3 Thoroughly clean the window glass, clean the glass of stains and dust and repair the glass glue, the corners must be cleaned. Step 4 A film of two layers of a film is a colorless transparent protective film called negative film, the other layer is sticky called positive film, negative film tearing, positive film is affixed to the glass. The first Kuai Feiqi Step 5 To clean the glass evenly sprayed with water, and then start tearing the film while tearing the film sprayed with water on the sticky film (spraying water is good for the film to move, positioning) on the location of the good need to paste, gently stick to the window glass. Step 6 Spray water on the surface of the film with detergent or shower gel water (for the next step to catch the water to play a lubricating effect, the operation is more smooth). Step 7 Scrape the film with a film scraper from the center to the edge, from top to bottom, so that the excess water from the edge of the frame to drain, (water scraping clean so that there will be no air bubbles). Step 8 With a sharp knife, along the glass edge of the excess film edge trimming is completed. Finally, please 24 hours or so (time to sunny days out of the sun shall prevail) do not go to clean and move, drying on the sticky very tight. |